HP G8 ML350 Media Bay Cage Kit

-
We recently got delivery of a HP generation 8 ML 350 Server and tried to fit the backup device in the usual slot, but found the space to large for the device and no mounting points. After trawling the quick specs for the server we found you need the below option. All the pictures on the net were wrong so thought I would share what they look like.

HP Part No - 661618-B21 HP Second Media Bay Cage Kit



As you can tell this gives the server chassis the ability to add to standard size DVD-roms or backup devices, also included were cables and mounting screws.

If you wanted to buy me a beer for these instructions please use paypal below :)
      

Buy me a beer :)
 

Comments

  1. Marty26 May 2013 at 07:27

    This comment has been removed by the author.

    ReplyDelete
  2. Marty26 May 2013 at 07:34

    Thanks for posting this info. Until I saw this post I wasn't 100% sure which part I needed to add additional 5.25 drives to a ML350e G8.
    All the images available (other than yours) appear to be from a previous generation 4LFF HDD bay.

    Cheers!
    Martin

    ReplyDelete

Post a Comment

Popular posts from this blog

Brother HL-2240 Toner light stays on after fitting new toner

-
Image
Brother HL-2240 Toner light stays on after fitting new toner I found this and it worked great. 1. Power Unit off 2. Open front cover 3. Press and hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light Goes red 8. Close door and you're all set 9. Some say a power off is required, it doesn't hurt :)       If you wanted to buy me a beer for these instructions please use paypal below, I have had a great response and thank you for the donations, it all helps :)        If my instructions have helped and saved you a call out, Buy me a cool beer :)  
Read more

PS Admin - Dlink printservers 301p+

-
PS Admin - Dlink print servers Dlink Print Server Setup ftp://ftp.dlink.com/Printserver/PS_Admin/Psadmin.exe Double click the downloaded file this creates a folder in the c: drive called psadmin\disk1 run the setup util from here. Follow the on screen prompts and install normally. Double click the PS Admin ver 3.00 shortcut now in the progrm list. Select the correct print server on the left device list. The characters co-incide with the last 6 digits on the print servers MAC Address. Once selected choose the TCP/IP Protocol in the configuration section on the screen, In here add the IP address, Subnet and gateway address. Once added Click the save configuration and your Print server is configured. From here you can also do remote test pages, firmware upgrades and factory resets.
Read more

Unicenta oPOS A4 Template -

-
Decided to make my own template which supports a4 printing, if ifs any good copy and paste :) <?xml version="1.0" encoding="UTF-8"?> <!--     uniCenta oPOS - Touch friendly Point Of Sale     Copyright (c) 2009-2012 uniCenta.     http://sourceforge.net/projects/unicentaopos     This file is part of uniCenta oPOS.     uniCenta oPOS is free software: you can redistribute it and/or modify     it under the terms of the GNU General Public License as published by     the Free Software Foundation, either version 3 of the License, or     (at your option) any later version.     uniCenta oPOS is distributed in the hope that it will be useful,     but WITHOUT ANY WARRANTY; without even the implied warranty of     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the     GNU General Public License for more details.     You should have received a copy of the GNU General Public License     along with uniCenta oPOS.  If not, see < http://www.gnu.org/licens
Read more