I.T Happens

We recently got delivery of a HP generation 8 ML 350 Server and tried to fit the backup device in the usual slot, but found the space to large for the device and no mounting points. After trawling the quick specs for the server we found you need the below option. All the pictures on the net were wrong so thought I would share what they look like. HP Part No - 661618-B21 HP Second Media Bay Cage Kit As you can tell this gives the server chassis the ability to add to standard size DVD-roms or backup devices, also included were cables and mounting screws. If you wanted to buy me a beer for these instructions please use paypal below :)        Buy me a beer :)  

PS Admin - Dlink print servers Dlink Print Server Setup ftp://ftp.dlink.com/Printserver/PS_Admin/Psadmin.exe Double click the downloaded file this creates a folder in the c: drive called psadmin\disk1 run the setup util from here. Follow the on screen prompts and install normally. Double click the PS Admin ver 3.00 shortcut now in the progrm list. Select the correct print server on the left device list. The characters co-incide with the last 6 digits on the print servers MAC Address. Once selected choose the TCP/IP Protocol in the configuration section on the screen, In here add the IP address, Subnet and gateway address. Once added Click the save configuration and your Print server is configured. From here you can also do remote test pages, firmware upgrades and factory resets.