Advent 5431 - Drivers Windows Vista

-
If you require Drivers for vista for the above laptop try these

Windows Vista Wireless Drivers

Graphics drivers etc will be pulled in from windows update.

The sm bus controller can be found by using the intel driver checker website here http://www.intel.com/p/en_US/support/detect?iid=dc_iduu

all should now be installed

If you wanted to buy me a beer for these instructions please use paypal below :)
      

Buy me a beer :)
 

Comments

Post a Comment

Popular posts from this blog

Brother HL-2240 Toner light stays on after fitting new toner

-
Image
Brother HL-2240 Toner light stays on after fitting new toner I found this and it worked great. 1. Power Unit off 2. Open front cover 3. Press and hold GO and turn power on 4. When all 3 lights lit release and press GO twice 5. All lights turn solid 6. With all solid, press GO 5 times 7. Ready light Goes red 8. Close door and you're all set 9. Some say a power off is required, it doesn't hurt :)       If you wanted to buy me a beer for these instructions please use paypal below, I have had a great response and thank you for the donations, it all helps :)        If my instructions have helped and saved you a call out, Buy me a cool beer :)  
Read more

PS Admin - Dlink printservers 301p+

-
PS Admin - Dlink print servers Dlink Print Server Setup ftp://ftp.dlink.com/Printserver/PS_Admin/Psadmin.exe Double click the downloaded file this creates a folder in the c: drive called psadmin\disk1 run the setup util from here. Follow the on screen prompts and install normally. Double click the PS Admin ver 3.00 shortcut now in the progrm list. Select the correct print server on the left device list. The characters co-incide with the last 6 digits on the print servers MAC Address. Once selected choose the TCP/IP Protocol in the configuration section on the screen, In here add the IP address, Subnet and gateway address. Once added Click the save configuration and your Print server is configured. From here you can also do remote test pages, firmware upgrades and factory resets.
Read more

Unicenta oPOS A4 Template -

-
Decided to make my own template which supports a4 printing, if ifs any good copy and paste :) <?xml version="1.0" encoding="UTF-8"?> <!--     uniCenta oPOS - Touch friendly Point Of Sale     Copyright (c) 2009-2012 uniCenta.     http://sourceforge.net/projects/unicentaopos     This file is part of uniCenta oPOS.     uniCenta oPOS is free software: you can redistribute it and/or modify     it under the terms of the GNU General Public License as published by     the Free Software Foundation, either version 3 of the License, or     (at your option) any later version.     uniCenta oPOS is distributed in the hope that it will be useful,     but WITHOUT ANY WARRANTY; without even the implied warranty of     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the     GNU General Public License for more details.     You should have received a copy of the GNU General Public License     along with uniCenta oPOS.  If not, see < http://www.gnu.org/licens
Read more